- Home
- Skills
- Agents & Orchestration
- solidcraft 3d print DfM
Works with the AI Agents you already use
solidcraft 3d print DfM
DFM checklist for SolidCraft models to ensure successful FDM 3D printing on desktop machines.
Free
solidcraft 3d print DfM
Example session with this skill installed
Review my SolidCraft design for a print-in-place box hinge. The wall thickness is 1.2mm and I'm using a 0.4mm nozzle. Check the clearances and overhangs for a Bambu A1 mini.
- Read your context and instructions
- Compiled the solidcraft 3d print
I have reviewed the hinge design against FDM DFM standards. The 1.2mm wall thickness is ideal as it is a multiple of the 0.4mm nozzle width. I have flagged the bore orientation and gap tolerances for the print-in-place mechanism.
DFM Review: Print-in-Place Hinge
| Feature | Requirement | Current Status | Recommendation |
|---|---|---|---|
| Wall Thickness | >= 0.8 mm (multiples of 0.4) | 1.2 mm | Pass. Provides 3 clean perimeters. |
| Hinge Clearance | 0.4 mm radial/axial gap | Not specified | Set radial gap to 0.4 mm; ensure bodies do not touch. |
| Overhangs | <= 45 degrees | 90 deg at top of bore | Apply 45 deg chamfer or teardrop to bore top. |
| Bore Axis | Horizontal orientation | Vertical | Rotate model so pin/bore axis is horizontal. |
| Print Bed | < 170 mm (A1 mini) | Within limits | Ensure flat base has 0.5 mm chamfer for elephant foot. |
Slicer Hand-over Notes
- Profile: 0.16 mm or 0.20 mm layer height. Do not use 0.28 mm "Extra Draft".
- Supports: Set to OFF to avoid filling the internal hinge gaps.
- Walls: Use 3-4 walls for structural integrity of the hinge plates.
- Assembly: Load 3MF as a single object with multiple parts in Bambu Studio.
Next steps
- Apply a teardrop profile to the horizontal hinge bore to eliminate the 90-degree bridge.
- Use the
measuretool in SolidCraft to verify the 0.4 mm gap between the pin and the bore. - Export the folder with the
.3mffile and this review as a text note for the slicer operator.
Connects securely to your tools. The creator never sees your data.
About this skill
FDM 3D printing often fails because CAD models ignore physical printer constraints. This skill applies strict Design for Manufacturing (DFM) rules to SolidCraft designs to ensure they print successfully on desktop FDM machines like the Bambu Lab A1 mini.
What it does
- Geometry validation enforces minimum wall thicknesses, overhang limits, and nozzle-specific feature sizes.
- Clearance management defines exact gaps for mating parts and print-in-place hinges to prevent fused components.
- Orientation optimization suggests modeling poses that align with Z-axis strength and minimize support requirements.
- SolidCraft build checks identifies potential boolean kernel hangs and vertex order issues during the modeling process.
- Export preparation generates standard hand-over notes including slicer settings and assembly instructions for Bambu Studio.
How it works
- Analyze geometry against the 0.4 mm nozzle constraints and 180 mm bed volume.
- Review clearances for sliding parts or integrated hinges using specific radial and axial gap values.
- Verify overhangs and suggest teardrop profiles or chamfers for unsupported spans.
- Format export instructions for 3MF/STL files including specific slicer profile recommendations.
Frameworks & tools
SolidCraft CAD, Bambu Studio, FDM 3D printers (optimized for 0.4 mm nozzles and A1 mini bed dimensions).
Why this beats prompting it yourself
Generic prompts often miss specific hardware limitations like elephant foot compensation or specific boolean kernel bugs in SolidCraft. This skill uses verified gap tolerances and specific geometric workarounds that prevent common print failures and CAD crashes.
Use cases
- Designing functional mechanical assemblies with sliding parts.
- Creating print-in-place hinges that do not fuse during the build.
- Optimizing parts for support-free printing to reduce post-processing.
- Auditing SolidCraft files for boolean stability before final export.
Known limitations
Constraints are optimized for 0.4 mm nozzles. Some clearance values for horizontal holes and print-in-place hinges are marked as unverified working values.
Optimized for 0.4 mm nozzles and 180 mm beds. Clearance values for hinges and horizontal holes are currently unverified working estimates.
How to use
- 1
Connect your agent to the Agensi MCP
Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup
- 2
Sign in to Agensi
Your agent shows a sign-in link. Sign in and click Allow.
- 3
Ask for what you need
Your agent loads this skill and uses it on your task. It always asks before any payment.
Reviews
No reviews yet
Be one of the first to try it. Every listed skill goes through the trust checks below.
Security scanned
Checked by our 8-point scan before listing
Fresh listing
Recently published to Agensi
Free forever
No account required to browse
Trust & safety
Security scan
Security scan passed 19 days ago
- Free with an Agensi account
Permissions
No special permissions declared or detected