More screenshots
Works with the AI Agents you already use
siglent sds800xhd
Interfacing with lab hardware usually requires proprietary drivers or bloated software suites.
$5
siglent sds800xhd
Example session with this skill installed
Connect to the scope at 192.168.1.55. Check the status of channel 1, set the trigger to 2.5V rising edge, and take a screenshot of the current signal.
- Read your context and instructions
- Compiled the siglent sds800xhd
- Generated the data export
I have connected to the Siglent SDS814X HD at 192.168.1.55. Channel 1 is active, and I have updated the trigger settings and captured the display.
Scope Status and Capture
| Parameter | Value |
|---|---|
| Model | SDS814X HD |
| Serial | SDS8HDX6R2041 |
| C1 Scale | 500 mV/div |
| C1 Offset | 0.00 V |
| Trigger | C1, Edge, Rising, 2.50 V |
| Timebase | 1.00 ms/div |
| Screenshot | sds_cap_20231027_1420.png |
# Configuration used for this capture
python scripts/sds.py --host 192.168.1.55 channel C1 --on on --scale 0.5
python scripts/sds.py --host 192.168.1.55 acq run --trig-source C1 --trig-level 2.5 --trig-slope RISing
python scripts/sds.py --host 192.168.1.55 screenshot sds_cap_20231027_1420.png
Next steps
- Download
sds_cap_20231027_1420.pngto inspect the waveform visually. - Run
measure C1 FREQ PKPKto get precise hardware timing and amplitude data. - Use
waveform C1 --csv data.csvif you need to perform FFT or offline analysis on the raw samples.
sds_cap_20231027_1420.png
CSV · data export
Example file from a real run - the skill writes it into your workspace.
Connects securely to your tools. The creator never sees your data.
About this skill
Interfacing with lab hardware usually requires proprietary drivers or bloated software suites. This skill provides direct network control of Siglent SDS800X HD series oscilloscopes using a lightweight SCPI implementation. It eliminates the need for VISA libraries or vendor-specific desktop tools by communicating over standard TCP sockets.
What it does
- Hardware Control manages vertical scales, timebase, trigger settings, and channel coupling.
- Automated Measurement retrieves up to 12 simultaneous hardware parameters like frequency, RMS, and rise time.
- Data Export captures high-resolution waveform data to CSV for external analysis in Python or Excel.
- Visual Verification generates PNG screenshots of the instrument display for remote monitoring.
- Statistical Analysis tracks min, max, and standard deviation over multiple acquisitions.
How it works
- Connect to the scope using the instrument's IP address on port 5025.
- Initialize by querying the device ID and current channel status to verify the signal path.
- Configure the vertical and horizontal acquisition settings to frame the signal correctly.
- Execute measurements or data captures using specific commands for waveforms, screenshots, or hardware stats.
Frameworks & tools
The system uses a standalone Python script compatible with version 3.8 and higher. It communicates via the SCPI (Standard Commands for Programmable Instruments) protocol over raw TCP/IP.
Why this beats prompting it yourself
Writing reliable SCPI scripts requires handling complex timing, binary data formats, and specific instrument command dialects. This skill includes a pre-built driver that abstracts these complexities into simple JSON-returning commands, ensuring you do not have to manually parse raw socket responses or handle instrument-specific error codes.
Use cases
- Automated Bench Testing for characterizing power supply ripple or clock jitter.
- Remote Debugging of hardware when the engineer is not physically at the lab bench.
- Documentation Pipelines that automatically attach scope screenshots to Jira or GitHub issues.
- Long-term Stability Testing by logging hardware statistics over hours of operation.
Known limitations
Requires a Siglent SDS800X HD series scope with LAN access. It does not support older SDS1000 series command sets or USB-only connections.
Requires Siglent SDS800X HD series hardware with LAN enabled. Supports only TCP port 5025. Does not support legacy SDS1000-style commands or USB connectivity.
How to use
- 1
Connect your agent to the Agensi MCP
Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup
- 2
Sign in to Agensi
Your agent shows a sign-in link. Sign in and click Allow.
- 3
Ask for what you need
Your agent loads this skill and uses it on your task. It always asks before any payment.
Reviews
No reviews yet
Be one of the first to try it. Every listed skill goes through the trust checks below.
Security scanned
Checked by our 8-point scan before listing
Fresh listing
Recently published to Agensi
Money-back guarantee
Doesn't do what its page promises? You get your money back.
Trust & safety
Security scan
Security scan passed 13 days ago
Requires