sap2000
Automate CSi SAP2000 modeling, analysis, and result extraction for structural engineering workflows.
Free
Works with the AI Agents you already use
sap2000
Example session with this skill installed
Create a 10m long simply supported IPE300 steel beam in SAP2000. Apply a 20kN/m gravity load, run the analysis, and tell me the max deflection and moment.
- Read your context and instructions
- Compiled the sap2000
I have created the beam, applied the loads, and completed the analysis in SAP2000 using kN, m, and C units.
Structural Analysis Summary: IPE300 Beam
| Parameter | Value | Unit | Notes |
|---|---|---|---|
| Material | S355 (Steel) | - | E = 2.0e8 kN/m² |
| Section | IPE300 | - | Imported from Euro.xml |
| Span | 10.0 | m | Simply supported (Pinned/Roller) |
| Load (Dead) | 20.0 | kN/m | Downward gravity load |
| Max Moment (M3) | 250.00 | kN-m | At mid-span (wL²/8 check: 250.0) |
| Max Deflection (U3) | -21.4 | mm | At mid-span |
| Base Reaction (Fz) | 100.0 | kN | Per support (200kN total) |
Next steps
- Run
run_design(kind="steel")to check the IPE300 utilization ratio. - Add a Live Load pattern to create ULS combinations (1.35D + 1.5L).
- Call
refresh_viewto see the deformed shape in the SAP2000 GUI.
Connects securely to your tools. The creator never sees your data.
About this skill
Structural engineering is often slowed down by manual modeling and repetitive analysis cycles. This skill automates CSi SAP2000 through MCP tools, allowing you to build, analyze, and check structural models directly from your agent. It handles the heavy lifting of geometry creation, load application, and results extraction so you can focus on design decisions.
What it does
- Automated Modeling creates frames, trusses, and slabs using built-in templates or custom coordinate geometry.
- Material Management adds code-specific materials like ASTM A992 Grade 50 or EN 1992-1-1 C30/37 with correct mechanical properties.
- Load Application defines load patterns, combinations (ULS/SLS), and assigns frame, joint, or area loads with gravity orientation.
- Analysis Execution runs static and modal analyses, checking solver status for every case.
- Result Extraction pulls joint displacements, member forces (P, V2, M3), base reactions, and modal periods into structured data.
- Steel Design triggers design checks and retrieves design ratios to identify failing members.
How it works
- Initialize: Call
get_model_infoto attach to the active SAP2000 instance and sync unit systems (e.g., kN_m_C). - Build: Use
add_frameor template commands to generate geometry, followed byadd_materialandadd_frame_section. - Load: Define
add_load_patternandadd_load_combinationbefore assigning magnitudes to specific objects. - Solve: Save the
.sdbfile and executerun_analysisorrun_design. - Verify: Use
get_frame_forcesorget_tableto audit results and perform sanity checks against hand calculations.
Frameworks & tools
This skill requires CSi SAP2000 installed on a Windows machine. It interacts with the SAP2000 OAPI via MCP tools (mcp__sap2000__*) and supports standard structural codes including AISC and Eurocode.
Why this beats prompting it yourself
Writing structural geometry scripts manually is error-prone, especially regarding unit conversions and local axis orientations. This skill handles unit consistency (kN, m, C) throughout the session and includes built-in sanity checks for base reactions and bending moments.
Use cases
- Generate a 2D portal frame with wind and snow loads in seconds.
- Extract max displacements and modal periods for a seismic feasibility study.
- Audit existing models for steel design ratios and identify overstressed members.
- Batch update section sizes across multiple frame objects based on analysis results.
Known limitations
Requires SAP2000 to be open on a Windows machine with the OAPI registered. Editing geometry or loads requires unlocking the model, which deletes existing analysis results.
Requires SAP2000 open on Windows with OAPI registered via RegisterSAP2000.exe. Edits delete analysis results. Agent must manually manage unit consistency across tool calls.
How to use
- 1
Connect your agent to the Agensi MCP
Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup
- 2
Sign in to Agensi
Your agent shows a sign-in link. Sign in and click Allow.
- 3
Ask for what you need
Your agent loads this skill and uses it on your task. It always asks before any payment.
Reviews
No reviews yet
Be one of the first to try it. Every listed skill goes through the trust checks below.
Security scanned
Checked by our 8-point scan before listing
1 use
Times used to date
Free forever
No account required to browse
Trust & safety
Security scan
Security scan passed 16 days ago
- Free with an Agensi account
Requires