- Home
- Skills
- APIs & Backend
- pcb eda playbook
pcb eda playbook
PCB design and EDA troubleshooting playbook with SI/PI budgets, EMC strategies, and engineering calculators.
$10
/moSubscription · cancel anytime
Secure checkout via Stripe
- Always the latest version
- Delivered live to your agent via MCP
- Cancel anytime, access ends at period end
Works with the AI Agents you already use
pcb eda playbook
Example session with this skill installed
I have a 4-layer FR4 board. I need 100 ohm differential impedance for USB 2.0. Trace width is 0.12mm, height to plane is 0.20mm, copper thickness 0.035mm, Dk 4.3. Calculate the required spacing.
- Read your context and instructions
- Compiled the pcb eda playbook
I have calculated the differential impedance parameters for your 4-layer FR4 USB 2.0 routing. Based on your input, I ran the pcb_calc.py utility to determine the spacing required to hit your 100 Ω target.
USB 2.0 Differential Impedance Analysis
| Parameter | Value | Unit |
|---|---|---|
| Target Impedance | 100 (±10%) | Ω |
| Trace Width (w) | 0.12 | mm |
| Dielectric Height (h) | 0.20 | mm |
| Copper Thickness (t) | 0.035 | mm |
| Dielectric Constant (Dk) | 4.3 | - |
| Calculated Spacing (s) | 0.18 | mm |
| Calculated Diff Z | 100.4 | Ω |
| Propagation Delay | 6.82 | ps/mm |
Design Rules for USB 2.0
- Intra-pair Skew: Keep within 5 mil to maintain signal integrity.
- Reference Plane: Ensure a continuous GND plane under the pair; avoid crossing split planes.
Stub Length: Minimize via usage; if vias are necessary, ensure the stub length is minimized to avoid resonance at harmonic frequencies.
Next steps
- Send these stackup requirements to your PCB manufacturer to confirm their specific Dk for 1080/2116 prepreg.
- Update your Altium/Allegro Design Rules (DRC) with a minimum 0.18mm gap for the
USB_DIFFnet class. - Verify the intra-pair skew in your PCB editor after routing.
Subscription · always the latest version
- Secure checkout via Stripe
- Cancel anytime
- Delivered live via MCP
About this skill
Hardware development moves fast, but board defects and SI/PI failures can halt production for weeks. This skill provides a structured diagnostic framework and engineering calculator to resolve PCB faults, optimize high-speed signals, and pass EMC certification without guesswork.
What it does
- Fault Diagnosis uses a six-layer model to isolate issues across power, netlists, stackups, and manufacturing.
- High-Speed Design provides budgets and rules for DDR4, PCIe, USB 3.x, and HDMI.
- Engineering Calculations runs Python scripts for impedance, trace width, via inductance, and PDN target impedance.
- Manufacturing Review audits DFM/DFA constraints to prevent assembly defects and yield loss.
- Lab Measurement defines specific methods for probe connection and waveform interpretation.
How it works
- Classify the fault using the diagnosis framework to map issues to specific layers like PDN, routing, or assembly.
- Execute calculation scripts to verify impedance or current capacity instead of relying on approximations.
- Apply specialized playbooks for SI/PI, EMC, or EDA-specific error translation.
- Generate reports using provided templates for pre-fab reviews or EMI rework plans.
Frameworks & tools
Python standard library for calculators. Support for Altium Designer, Cadence Allegro, Mentor PADS, KiCad, and LCEDA design rules and error codes.
Why this beats prompting it yourself
Generic AI lacks the hardware-specific "fault tree" logic needed to differentiate between a design error and a manufacturing batch defect. This tool enforces strict engineering targets for controlled impedance and PDN based on IPC-2221 standards rather than offering vague layout advice.
Use cases
- Debugging random system resets or ADC noise issues.
- Calculating precise trace widths for 5A power rails with specific thermal constraints.
- Fixing radiated emissions failures in a lab environment.
- Translating cryptic DRC/ERC errors into actionable design changes.
Known limitations
Calculations provide engineering estimates that must be verified against manufacturer stackup data or field solvers. Does not replace physical lab verification or certification body testing.
Requires Python for calculation scripts. Engineering estimates require final validation by PCB fab house field solvers. Does not replace certification body testing.
How to use
- 1
Connect your agent to the Agensi MCP
Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup
- 2
Sign in to Agensi
Your agent shows a sign-in link. Sign in and click Allow.
- 3
Ask for what you need
Your agent loads this skill and uses it on your task. It always asks before any payment.
Reviews
No reviews yet
Be one of the first to try it. Every listed skill goes through the trust checks below.
Security scanned
Checked by our 8-point scan before listing
Fresh listing
Recently published to Agensi
Free forever
No account required to browse
Trust & safety
Security scan
Security scan passed 13 days ago