Path Planning & SLAM for Real Robots

    1

    Choose, tune and validate robot path planners and 2D/3D SLAM, with simulation benchmarks and ATE/RPE metrics.

    $39

    Secure checkout via Stripe

    Money-back guarantee

    Converts to your local currency at checkout

    Security scanned

    Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIMuseMuseDotsDots+21 more

    Path Planning & SLAM for Real Robots

    Example session with this skill installed

    I have a differential drive robot with a 2D Lidar and IMU. I need to set up a SLAM stack for a 5000sqm warehouse and a planner that handles dynamic obstacles. Recommend a stack and metrics.

    • Read your context and instructions
    • Compiled the path planning

    I have analyzed your requirements for a differential drive robot in a warehouse environment. Given the 5000sqm scale and sensor suite, a 2D occupancy grid approach is most efficient.

    Recommended Navigation & SLAM Stack

    ComponentRecommendationReasoning
    SLAM Stackslam_toolbox (Asynchronous)Better suited for large maps than Gmapping; handles loop closure effectively in long corridors.
    Global PlannerD* LiteEfficiently handles re-planning when warehouse layouts change or paths are blocked.
    Local PlannerTEB Local PlannerRespects differential kinematics while accounting for dynamic obstacle avoidance.
    Sensor Fusionrobot_localization (EKF)Fuses wheel odometry, IMU, and Lidar-based scan matching to minimize drift.

    Benchmarking Metrics

    To validate this configuration, we will monitor the following KPIs during simulation runs:

    SLAM ATE (Absolute Trajectory Error): Measured via evo using ground truth or loop-closure consistency. Target: < 0.15m.

    • Planning Latency: p95 response time for global re-planning when a dynamic obstacle blocks the primary route.
    • Path Clearance: Minimum distance maintained from obstacles relative to the robot's 0.6m x 0.8m footprint.

    Success Rate: Percentage of navigation tasks completed without collision or localization loss across 50 randomized scenarios.

    Next steps

    1. Configure slam_toolbox in asynchronous mode to prevent processing lag during the initial 5000sqm mapping run.
    2. Calibrate the Lidar-to-IMU extrinsics to ensure the EKF does not diverge during rapid rotations.
    3. Run a simulation benchmark in a high-density dynamic obstacle scenario to tune the TEB costmap inflation layers.

    Connects securely to your tools. The creator never sees your data.

    About this skill

    From occupancy grids to loop closure — choose, tune and validate.

    Implement and tune robot path planning and SLAM - grid and sampling planners (A*, D* Lite, Hybrid-A*, RRT*, lattice), trajectory optimisation, and 2D/3D SLAM (slam_toolbox, Cartographer, RTAB-Map, ORB-SLAM3, LIO-SAM/FAST-LIO) - with simulation benchmarks and metrics (ATE/RPE, success rate, path quality). Use when the user needs a robot or drone to plan paths, build maps, localize, or when a planner is slow/unsafe or a map drifts.

    Includes an EXPERT.md reference (exact parameters, thresholds, failure diagnosis).

    Acceptable use: civil and commercial applications only. Any military, paramilitary or weapon-related use is prohibited, as stated in the skill itself.

    Requires simulation environments or rosbags for benchmarking. Restricted to civil and commercial applications; strictly no military or weapon-related use.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before any payment.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Money-back guarantee

    Doesn't do what its page promises? You get your money back.

    Trust & safety

    Security scan

    Security scan passed 28 days ago

    Permissions

    Read Files
    Listed28 days ago

    What's inside

    Frequently Asked Questions

    This skill automates the selection, configuration, and benchmarking of navigation stacks, ensuring your robot avoids unsafe paths and map drift that generic AI prompts often overlook.

    The skill is designed for ROS and ROS2 environments and is compatible with AI agents capable of executing Python-based robotics workflows and interacting with simulation data.

    You receive a comprehensive technical framework for algorithm selection, automated SLAM configuration, and a benchmarking suite to evaluate ATE/RPE and planning latency.

    The skill supports a wide range of kinematics including differential drive, holonomic (omnidirectional), Ackermann-steer (car-like), and aerial drone configurations.

    You will need an existing ROS/ROS2 workspace and either a simulation environment (like Gazebo or Isaac Sim) or recorded rosbag data to run the benchmarking and tuning workflows.

    Updates are provided to maintain compatibility with new versions of supported SLAM libraries like ORB-SLAM3 and LIO-SAM, as well as evolving ROS2 distributions.

    New in Agents & Orchestration