Works with the AI Agents you already use
lithium battery cell engineer
Technical expert for lithium-ion battery cell design, material selection, manufacturing, and failure analysis.
$15
lithium battery cell engineer
Example session with this skill installed
I need to design a 100 Ah prismatic cell for an EV using NCM 811 and a graphite anode. What are the recommended design parameters, including cathode loading and N/P ratio?
- Read your context and instructions
- Compiled the lithium battery cell
I will calculate the design parameters for a 100 Ah NCM 811/Graphite prismatic cell, focusing on energy density and safety margins. ## Cell Design Specification: 100 Ah NCM 811 Prismatic | Parameter | Recommended Value | Unit | | :--- | :--- | :--- | | **Cathode Material** | NCM 811 | - | | **Cathode Specific Capacity** | 200 - 210 | mAh/g | | **Anode Material** | Graphite | - | | **Anode Specific Capacity** | 350 - 360 | mAh/g | | **N/P Ratio** | 1.15 - 1.20 | - | | **Areal Capacity Loading** | 3.5 - 4.0 | mAh/cm² | | **Coating Thickness (One side)** | 60 - 80 | µm | | **Target Porosity (Cathode)** | 25 - 30 | % | | **Target Porosity (Anode)** | 30 - 35 | % | | **Electrolyte Injection** | 3.0 - 3.5 | g/Ah | | **Voltage Window** | 2.8 - 4.2 | V | | **Nominal Voltage** | 3.7 | V | ### Design Considerations 1. **N/P Ratio:** A target of 1.15 is recommended for EV applications to prevent lithium plating during fast charging while maintaining energy density. 2. **Electrode Loading:** For a 100 Ah cell, higher areal loading (4.0 mAh/cm²) is preferred to reduce the number of internal layers and increase gravimetric energy density, though this requires careful electrolyte wetting management. 3. **Safety:** NCM 811 has lower thermal stability than LFP. Ensure the separator is ceramic-coated (PE + Al₂O₃) with a thickness of 12-16 µm to mitigate internal shorts. **Next steps** - Calculate the total required electrode area based on the chosen areal loading. - Select electrolyte additives (e.g., VC or FEC) to stabilize the SEI layer for the 811 chemistry. - Define the formation protocol, specifically the low C-rate first charge to optimize SEI quality.
Connects securely to your tools. The creator never sees your data.
About this skill
Engineers working on lithium-ion technology face complex trade-offs between energy density, safety, and manufacturing yield. This skill provides a deep technical reference for cell design, material selection, and failure diagnosis to accelerate battery development cycles. ## What it does - **Architectural design** calculates cell capacity, N/P ratios, energy density, and power density for cylindrical, prismatic, and pouch formats. - **Material selection** evaluates cathode, anode, electrolyte, and separator chemistries based on specific capacity, voltage windows, and stability. - **Process optimization** defines parameters for mixing, coating, calendering, and formation to ensure electrode uniformity and quality. - **Testing & characterization** interprets electrochemical data from EIS, DCIR, cycle life, and rate capability tests. - **Safety analysis** assesses thermal runaway risks and provides protocols for nail penetration, crush, and overcharge testing. - **Failure diagnosis** identifies root causes for capacity fade, swelling, lithium plating, and gas generation using post-mortem workflows. ## How it works 1. **Design mode** takes target capacity and chemistry requirements to output electrode mass, loading, and geometry specifications. 2. **Analysis mode** processes test results or failure symptoms to pinpoint electrochemical degradation mechanisms. 3. **Reference mode** retrieves specific manufacturing parameters or international standards like IEC, UL, and GB/T. ## Frameworks & tools The skill utilizes electrochemical formulas, manufacturing SPC principles, and standard battery testing methodologies. It references data for LCO, NCM, NCA, LFP, and LTO chemistries alongside graphite, silicon, and titanate anodes. ## Why this beats prompting it yourself Generic models often hallucinate specific capacity values or fail to account for the critical N/P ratio safety margins. This skill maintains strict technical grounding in battery engineering constants and industry-standard safety protocols. ## Use cases - Dimensioning a new prismatic cell for an EV pack to meet specific Wh/kg targets. - Troubleshooting unexpected capacity loss in LFP cells during high-rate cycling. - Selecting electrolyte additives to improve SEI stability on silicon-dominant anodes. - Mapping out a standard-compliant safety testing plan for a new cell prototype. ## Known limitations Does not provide real-time simulation of cell chemistry or CFD modeling. User must provide raw test data for interpretation.
Requires user-provided test data for analysis. Does not perform real-time electrochemical simulation or CAD modeling. Focuses on Li-ion chemistries only.
How to use
- 1
Connect your agent to the Agensi MCP
Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup
- 2
Sign in to Agensi
Your agent shows a sign-in link. Sign in and click Allow.
- 3
Ask for what you need
Your agent loads this skill and uses it on your task. It always asks before any payment.
Reviews
No reviews yet
Be one of the first to try it. Every listed skill goes through the trust checks below.
Security scanned
Checked by our 8-point scan before listing
Fresh listing
Recently published to Agensi
Money-back guarantee
Doesn't do what its page promises? You get your money back.
Trust & safety
Security scan
Security scan passed 22 days ago
Permissions
No special permissions declared or detected