- Home
- Skills
- Agents & Orchestration
- kicad-pcb-agent
Kicad Pcb Agent
Automated KiCad PCB design system with lifecycle analysis, DFM gating, and high-speed routing verification.
Free
Works with the AI Agents you already use
kicad-pcb-agent
Example session with this skill installed
Run a DFM audit on my current KiCad project using the JLC-7628 stackup and generate a lifecycle report for the BOM.
- Read your context and instructions
- Compiled the kicad-pcb-agent
I have completed the design audit and lifecycle scan for the current project. The process included a full DRC injection based on the JLC-7628 stackup and a real-time stock check via Nexar.
Audit Results & Lifecycle Status
| Category | Status | Findings |
|---|---|---|
| BOM Lifecycle | WARNING | U2 (MCU) is marked as NRND. Alternative MPN suggested: STM32H723ZGT6. |
| DFM Check | PASS | Trace/Space (0.1/0.1mm) compliant with JLC-7628 capabilities. |
| Mechanical | PASS | All connectors clear the 3D keepout zones defined in case.dxf. |
| Stackup | VERIFIED | Impedance rules for 90-ohm differential pairs applied to USB_D and USB_P nets. |
Next steps
- Review
alternates.jsonto confirm the pin-compatibility of the suggested MCU replacement. - Run
cpl-assemblyto generate the final manufacturing bundle now that DFM is green. - Execute the
dft-testpointsskill to verify access for the SWD header.
Connects securely to your tools. The creator never sees your data.
About this skill
Engineering a production-ready PCB requires more than just drawing traces; it demands rigorous validation across multiple physics domains and supply chain constraints. This skill package automates the heavy lifting of KiCad design cycles, from initial power budgeting to final manufacturing handoff. It replaces manual checklists with automated gates that verify electrical, mechanical, and thermal integrity at every stage.
What it does
- Automated Routing & Analysis executes high-speed differential pair routing, crosstalk scanning, and topological auto-routing with DRC-backed verification.
- Supply Chain & Lifecycle Management scans Nexar/Octopart for stock levels and generates pin-compatible alternatives for NRND or EOL components.
- Physical Verification validates board outlines and 3D keepout zones against DXF/STEP files to ensure mechanical enclosure fit.
- Manufacturing Handoff generates Gerber, CPL, and BOM packages with automated centroid rotation and fabrication orientation corrections.
- Quality Assurance Gates performs independent maker/checker audits, EMC/ESD pre-compliance checks, and rail-based power budget analysis.
How it works
- Design Intent Decomposition breaks down high-level hardware goals into specific decision units and context-filtered sub-tasks.
- Infrastructure Scaffolding establishes the stackup, power rail tree, and interface contracts before a single trace is drawn.
- Iterative Routing & Guardrails applies impedance rules and DFM constraints in real-time during the placement and routing phase.
- Final Promotion Gate triggers a design-checker run to verify all evidence artifacts before generating production outputs.
Frameworks & tools
The package interfaces directly with KiCad (kicad-cli) for schematic and PCB manipulation. It utilizes Octopart/Nexar for component intelligence and supports DXF/STEP for MCAD synchronization.
Why this beats prompting it yourself
Generic AI models lack the spatial and electrical awareness to manage netlist integrity or impedance-controlled stackups. This skill enforces a formal DAG-based workflow where every design change is backed by an evidence artifact, preventing the halluncinations and "silent" DRC failures common in manual prompting.
Use cases
- Rapidly porting a design to a new fab by re-injecting DFM capabilities into KiCad DRC.
- Automating the selection and pin-mapping of high-density connectors based on mechanical constraints.
- Running a third-party audit on an existing design to find hidden signal integrity risks.
- Generating production-ready CPL and BOM files with zero manual rotation editing.
Known limitations
Requires kicad-cli for automated board writes. High-speed simulation is limited to rule-based geometric analysis rather than full-wave EM field solving.
Requires kicad-cli for board manipulation. Signal integrity checks are geometric/rule-based, not full-wave EM simulations. Stok data depends on Nexar/Octopart API access.
How to use
- 1
Connect your agent to the Agensi MCP
Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup
- 2
Sign in to Agensi
Your agent shows a sign-in link. Sign in and click Allow.
- 3
Ask for what you need
Your agent loads this skill and uses it on your task. It always asks before any payment.
Reviews
No reviews yet
Be one of the first to try it. Every listed skill goes through the trust checks below.
Security scanned
Checked by our 8-point scan before listing
1 use
Times used to date
Free forever
No account required to browse
Trust & safety
Security scan
Security scan passed 24 days ago
- Free with an Agensi account
Requires
Permissions
Allowed Hosts