Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIMuseMuseDotsDots+21 more

    FPGA 09/13 · Flash Claude — Onto the Board

    1

    Automate and log FPGA bitstream programming with artifact verification and persistent flash boot checks.

    $10

    Secure checkout via Stripe

    Money-back guarantee

    Converts to your local currency at checkout

    Security scanned
    FPGA 09/13 · Flash Claude — Onto the Board

    FPGA 09/13 · Flash Claude — Onto the Board

    Example session with this skill installed

    Program the verified bitstream from the station 08 manifest to the Arty A7 flash and verify it survives a power cycle.

    • Read your context and instructions
    • Compiled the fpga 09 13

    Artifact verified: SHA-256 matches manifest.
    Connecting via JTAG... Device XC7A35T detected.
    Mode: Persistent SPI Flash.
    Programming via openFPGALoader... Success.
    DONE signal high. Power cycle check: Board successfully booted from flash.
    Log updated: Flash cycle 09 complete.

    Connects securely to your tools. The creator never sees your data.

    About this skill

    The problem

    FPGA programming often happens as a silent, unlogged side-click, leading to "works on my machine" demos that fail after a power cycle. Without strict artifact verification and boot-source checks, developers waste days debugging application logic when the real culprit is a mismatched bitstream or a volatile configuration RAM load.

    What it does

    • Verifies SHA-256 bitstream hashes against manifests before touching hardware to prevent accidental mix-ups.
    • Orchestrates hardware connection sequences using openFPGALoader or Vivado Hardware Manager's Auto Connect path.
    • Enforces the distinction between volatile JTAG configuration and persistent SPI flash programming.
    • Validates the FPGA DONE state and design heartbeat signals post-load.
    • Mandates power-cycle testing for flash targets to confirm boot-source settings and persistent storage.

    Frameworks & tools

    Xilinx Vivado Hardware Manager, openFPGALoader, JTAG interfaces, SPI Flash, and SHA-256 checksum tools.

    Why this beats prompting it yourself

    This skill transforms a manual, error-prone task into a repeatable hardware-in-the-loop procedure. It prevents common pitfalls like full rebuilds for firmware-only changes and ensures every measurement is backed by a verified, logged hardware state.

    Use cases

    • Automating persistent SPI flash programming with mandatory power-cycle verification.
    • Rapidly reloading soft-core program memory without triggering full FPGA implementation cycles.
    • Debugging "dark board" issues by verifying JTAG boot-source pins and DONE signals.
    • Generating traceable flash logs that link specific bitstream hashes to physical board IDs.

    Known limitations

    Requires local access to hardware programming tools and drivers. Flash verification depth depends on the underlying toolchain's support for wear leveling and error correction.

    Requires local installation of FPGA vendor tools or openFPGALoader. Physical board access is necessary for power-cycle and heartbeat verification.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before any payment.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Money-back guarantee

    Doesn't do what its page promises? You get your money back.

    Trust & safety

    Security scan

    Security scan passed 2 months ago

    Permissions

    No special permissions declared or detected

    Listed2 months ago

    What's inside

    Frequently Asked Questions

    This skill automates the entire FPGA programming lifecycle, from SHA-256 hash verification to post-load heartbeat validation, ensuring your hardware state is documented and persistent. It specifically eliminates the 'works on my machine' syndrome by enforcing power-cycle checks for SPI flash loads.

    The skill is designed for AI agents with local file and terminal access, and it requires pre-installed hardware toolchains like Xilinx Vivado Hardware Manager or openFPGALoader. It works best in environments where the agent can interface directly with connected JTAG programmers.

    Yes, it allows for targeted memory reloads, enabling you to update soft-core program data without the time-consuming process of a full FPGA implementation cycle. This significantly speeds up iterative firmware development.

    You receive the production-ready skill package, including the logic for artifact verification, automated JTAG/Flash orchestration sequences, and logging templates for hardware traceability. Access to future version updates and bug fixes is also included with your purchase.

    The skill uses a 'verify-before-write' approach, checking SHA-256 manifests against your local bitstreams to ensure the correct version is flashed. It also validates the FPGA's DONE pin status and monitors for heartbeat signals to confirm a successful boot.

    New in Agents & Orchestration