Drone Flight Log Forensics (ArduPilot/PX4)

    1

    Analyze ArduPilot and PX4 flight logs to diagnose crashes, vibration issues, and tuning problems.

    $24

    Secure checkout via Stripe

    Money-back guarantee

    Converts to your local currency at checkout

    Security scanned

    Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIMuseMuseDotsDots+21 more

    Drone Flight Log Forensics (ArduPilot/PX4)

    Example session with this skill installed

    My ArduPilot quadcopter just crashed. I have the .bin log. It started oscillating in Loiter mode then dropped. Can you analyze the VIBE and ATT data to find out why?

    • Read your context and instructions
    • Compiled the drone flight log

    I have analyzed the flight log data, specifically focusing on the transition from Loiter mode to the crash event. The data indicates a significant mechanical failure leading to an uncontrollable descent.

    Flight Log Analysis Report

    TimestampEvent/MessageObservationData Point
    00:04:12Mode ChangeEntered LoiterGPS Lock 3D, HDOP 0.8
    00:04:45VIBE.VibeX/YEscalating vibration> 85 m/s² (Threshold: 60)
    00:04:47RCOU.C3Motor 3 saturationOutput at 1950ms (MAX)
    00:04:48ATT.RollDesired vs Actual divergenceActual roll reached 45° vs 5° desired
    00:04:50ERR.SubsysEKF Primary changedEKF variance exceeded 0.8
    00:04:52CRASHImpact detectedAcceleration spike > 15G

    Findings

    Probable Cause (Mechanical Failure): Motor 3 output (RCOU.C3) saturated to maximum while the drone was unable to maintain roll authority. The sudden spike in VibeX/Y suggests a propeller blade failure or motor mount loosening immediately preceding the loss of control.
    2.

    EKF Instability: The high vibration levels (clipping at 90 m/s²) caused the EKF to lose orientation, leading to the "oscillations" described, which were actually the flight controller attempting to compensate for asymmetric thrust.
    3. Power: Battery voltage remained above 14.8V (4S); no brownout detected.

    Next steps

    • Inspect Motor 3 and its ESC for physical damage, burnt windings, or loose mounting screws.
    • Verify propeller integrity; check for stress fractures near the hub.
    • If hardware is intact, perform a bench test of the motors without props to check for bearing vibration.

    Connects securely to your tools. The creator never sees your data.

    About this skill

    Find the first anomaly, not the loudest one.

    Analyse ArduPilot (DataFlash .bin/.log) and PX4 (.ulg) flight logs to explain crashes, vibration, power, GPS, compass and tuning problems, and produce a clear report with fixes. Use when the user shares a drone flight log, asks why a drone drifted, oscillated, lost altitude, triggered a failsafe or crashed, or wants a health check after a flight.

    Includes an EXPERT.md reference (exact parameters, thresholds, failure diagnosis).

    Acceptable use: civil and commercial applications only. Any military, paramilitary or weapon-related use is prohibited, as stated in the skill itself.

    Cannot detect mechanical faults like loose screws without sensory symptoms. Requires CSV or supported binary formats. Refuses all military or weapon-related requests.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before any payment.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Money-back guarantee

    Doesn't do what its page promises? You get your money back.

    Trust & safety

    Security scan

    Security scan passed 28 days ago

    Permissions

    Read Files
    Listed28 days ago

    What's inside

    Frequently Asked Questions

    This skill supports the most common open-source telemetry formats, including .bin and .log files from ArduPilot (APM) and .ulg files from PX4 Pro.

    Unlike generic AI, this skill uses specialized libraries like pymavlink to parse raw data and applies specific industry thresholds for vibration and EKF variance to provide technical diagnoses rather than general guesses.

    The analysis can identify motor imbalances, power sags, and high vibration, but it cannot detect physical damage like a cracked arm or a loose screw if those issues do not manifest as measurable data anomalies in the log.

    You will receive the specialized logic and parsing configuration required to integrate this analysis into your AI agent, along with documentation on how to input your log files for processing.

    Yes, this skill is designed to analyze logs from various multirotor configurations, though it focuses on diagnosing flight dynamics and power systems regardless of the number of motors.

    New in Testing & Debugging