More screenshots

    Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIMuseMuseDotsDots+21 more

    Cisco IOS Config Helper: VLAN, OSPF, NAT and ACL

    1

    Writes, explains and reviews Cisco IOS configs for Packet Tracer and real gear (VLANs, trunks, inter-VLAN, DHCP, OSPF, NAT, ACLs, STP, EtherChannel, SSH, HSRP, IPv6) with the verification commands for each step.

    $12

    Secure checkout via Stripe

    Money-back guarantee

    Converts to your local currency at checkout

    Security scanned
    Cisco IOS Config Helper: VLAN, OSPF, NAT and ACL

    Cisco IOS Config Helper: VLAN, OSPF, NAT and ACL

    Example session with this skill installed

    Two switches and one router. VLAN 10 Sales and VLAN 20 IT, router-on-a-stick, DHCP on the router for both VLANs. Give me the configs and how to verify.

    • Read your context and instructions
    • Compiled the cisco ios config

    Design
    VLAN 10 SALES 192.168.10.0/24 gw .1 | VLAN 20 IT 192.168.20.0/24 gw .1 | VLAN 99 native

    SW1
    vlan 10
    name SALES
    vlan 20
    name IT
    interface range fa0/1 - 10
    switchport mode access
    switchport access vlan 10

    interface gi0/1
     switchport mode trunk
    

    switchport trunk native vlan 99

    R1

    interface gi0/0
     no shutdown
    interface gi0/0.10
     encapsulation dot1q 10
     ip address 192.168.10.1 255.255.255.0
    

    ip dhcp excluded-address 192.168.10.1 192.168.10.10
    ip dhcp pool SALES
    network 192.168.10.0 255.255.255.0
    default-router 192.168.10.1

    Verify: show vlan brief, show interfaces trunk, show ip interface brief, show ip dhcp binding; then ping the gateway and the other VLAN from a PC. Save with copy running-config startup-config.

    Connects securely to your tools. The creator never sees your data.

    About this skill

    Gives students and junior network admins correct, ready-to-paste IOS configuration plus the commands that prove it works. Reply in the language the user writes in (Spanish or English); keep IOS keywords in English.

    Ask only for what is missing: devices and models (router or switch, Layer 2 or Layer 3), links and interfaces, VLAN ids and names, IP plan (or offer to design it), services wanted (DHCP, NAT, routing protocol, ACLs, SSH), and whether this is Packet Tracer or real equipment. If the user pasted a topology description, extract the facts into a table first and confirm.

    Produce a short design block: addressing table (device, interface, IP, mask, gateway), VLAN table, link list, and the order of configuration. Check that subnets do not overlap, that gateways are inside their subnet, and that every VLAN used on an access port exists and is allowed on the trunk. Use references/ios-recipes.md for the exact command patterns.

    Give one code block per device, in configuration order (hostname and security, VLANs and Layer 2, interfaces and addressing, routing, services, ACLs, save). Rules:

    • Use documentation or private ranges and placeholders such as <SECRET> for passwords; never invent real credentials.
    • Add a one-line comment above each non-obvious block explaining why.
    • Remind the user to save with copy running-config startup-config and to bring interfaces up with no shutdown.
    • Note platform differences: a Layer 3 switch may need switchport trunk encapsulation dot1q before switchport mode trunk, a 2960 does not; routers need no shutdown on physical interfaces and subinterfaces use the parent; serial links need a clock rate on the DCE side.
    • State when a command is not supported in Packet Tracer or differs by IOS version, and offer the closest alternative.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before any payment.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Money-back guarantee

    Doesn't do what its page promises? You get your money back.

    Trust & safety

    Security scan

    Security scan passed 6 days ago

    Permissions

    No special permissions declared or detected

    Listed6 days ago

    What's inside

    Frequently Asked Questions

    No. It is a plain instruction skill: it gives you commands and designs you paste into Packet Tracer or a real device. It does not control Packet Tracer.

    mcp-tracer builds a topology and a PTBuilder script through an MCP server. This skill covers the CLI side: the IOS configuration, explanations, reviews and verification, and works with any AI agent.

    Yes, the patterns are standard IOS. It flags platform differences (Layer 3 switch trunk encapsulation, Packet Tracer limits) and tells you to check the question mark in the CLI when unsure.

    No. It describes what a healthy output looks like and only interprets output you paste.

    New in Education & Learning